Panasonic AW-RP Series
Panasonic Camera SpeedDome Full HD Remote Controller
Panasonic Camera SpeedDome Full HD Remote Controller
Camera Compatibility :
—————————–
AW-HE50HN/HE/SN/SE, AW-HE60HN/HE/SN/SE, AW-HE120WP/WE/KP/KE, AW-HE100N/E, AW-HE2P/E, AK-HC1500G, AK-HC1800G, AW-HE870N/E, AW-E860N/L, AW-E750P/E, AW-E650P/E, AW-E350P/E, AW-PH360N/L, AW-PH405N/E, AW-PH650N/L, AW-PH400P/E (requires AW-IF400G) Controllable features vary depending model
—————————–
AW-HE50HN/HE/SN/SE, AW-HE60HN/HE/SN/SE, AW-HE120WP/WE/KP/KE, AW-HE100N/E, AW-HE2P/E, AK-HC1500G, AK-HC1800G, AW-HE870N/E, AW-E860N/L, AW-E750P/E, AW-E650P/E, AW-E350P/E, AW-PH360N/L, AW-PH405N/E, AW-PH650N/L, AW-PH400P/E (requires AW-IF400G) Controllable features vary depending model
Features Panasonic AW-RP120 :
—————————————-
• Full size, precision joystick for smooth control of camera moves
• Preset Groups for easy, rapid scene changes (4 groups of up to 10 cameras)
• Separate Speed Shift Dials for Pan-Tilt/Zoom/Focus
• Direct panel controls for R/B Gain/Ped, Master Pedestal, Gain, Detail
• SD Card Storage for backup and recall of settings
• Tracing Memory for complex camera moves (includes SD card storage with IP cameras)
• ۱۰ Camera Direct Panel Selection Buttons
• ۵ cameras via RS422
• Up to 100 cameras via IP (10 groups of 10)
• SW-Link via IP with HS50 switcher, plus external control of RP120 via serial – for simpler workflowSpecifications Panasonic AW-RP120 :
———————————————–
• Power Supply: DC 12 V
• Power Consumption: 8 W
• Weight (Approx): 3. 1 kg (Approx. 6.9 lb)
• Dimensions (W x H x D): Approx. 342 mm x 77 mm x 265 mm
• (Approx. 13-1/2 inches x 3-1/16 inches x 10-7/16 inches)
• excluding protrusions
• Connectors:
• DC 12 V IN (XLR 4-pin)
• LAN (RJ-45) 10BASE-T/100BASE-TX, to control remote cameras
• SERIAL (RJ-45) RS-422, to control remote cameras x 5
• TALLY/GPI (D-sub 25-pin)
• REMOTE (D-sub 9-pin) RS-232C, for external control
—————————————-
• Full size, precision joystick for smooth control of camera moves
• Preset Groups for easy, rapid scene changes (4 groups of up to 10 cameras)
• Separate Speed Shift Dials for Pan-Tilt/Zoom/Focus
• Direct panel controls for R/B Gain/Ped, Master Pedestal, Gain, Detail
• SD Card Storage for backup and recall of settings
• Tracing Memory for complex camera moves (includes SD card storage with IP cameras)
• ۱۰ Camera Direct Panel Selection Buttons
• ۵ cameras via RS422
• Up to 100 cameras via IP (10 groups of 10)
• SW-Link via IP with HS50 switcher, plus external control of RP120 via serial – for simpler workflowSpecifications Panasonic AW-RP120 :
———————————————–
• Power Supply: DC 12 V
• Power Consumption: 8 W
• Weight (Approx): 3. 1 kg (Approx. 6.9 lb)
• Dimensions (W x H x D): Approx. 342 mm x 77 mm x 265 mm
• (Approx. 13-1/2 inches x 3-1/16 inches x 10-7/16 inches)
• excluding protrusions
• Connectors:
• DC 12 V IN (XLR 4-pin)
• LAN (RJ-45) 10BASE-T/100BASE-TX, to control remote cameras
• SERIAL (RJ-45) RS-422, to control remote cameras x 5
• TALLY/GPI (D-sub 25-pin)
• REMOTE (D-sub 9-pin) RS-232C, for external control
Features Panasonic AW-RP500 :
—————————————-
• Up to 5 cameras/pan-tilt heads may be controlled via serial connection
• Full camera control – control over configuration and image quality – using the camera menu
• Up to 100 pre-set memories are available per camera
• Various settings can be configured from a PC (configuration software supplied)
• Up to a hundred AW-HE50S/H units can be controlled via IP connections when using network hub (switching hub).
• IP addresses are automatically assigned to the AW-HE50S/H or AW-HS50 by the Automatic IP Address Setup function.
• One remote camera can be controlled simultaneously by up to five AW-RP50 units via an IP connection.
• Connection settings for the AW-RP50 can be configured with a PC (configuration software supplied)
• IP-control performance depends on network conditions.
• Video signals cannot be transmitted via IP.
• Connection is not available with using the public network.
—————————————-
• Up to 5 cameras/pan-tilt heads may be controlled via serial connection
• Full camera control – control over configuration and image quality – using the camera menu
• Up to 100 pre-set memories are available per camera
• Various settings can be configured from a PC (configuration software supplied)
• Up to a hundred AW-HE50S/H units can be controlled via IP connections when using network hub (switching hub).
• IP addresses are automatically assigned to the AW-HE50S/H or AW-HS50 by the Automatic IP Address Setup function.
• One remote camera can be controlled simultaneously by up to five AW-RP50 units via an IP connection.
• Connection settings for the AW-RP50 can be configured with a PC (configuration software supplied)
• IP-control performance depends on network conditions.
• Video signals cannot be transmitted via IP.
• Connection is not available with using the public network.