JBL CSA Series
Amplifiers Professional
By combining years of innovation, invention and insight from HARMAN brands, JBL® Commercial Series Amplifiers (CSA) go well beyond the expected in generating powerful sound.
From the switch-mode universal power supply to the efficient performance of Crown’s DriveCore™ Technology, we continue to set new standards in commercial power amplifier technology.
Simple to configure, the CS amp provides a DriveCore-based sound solution. This replaces up to 500 parts with one small chip, significantly reducing the part count and increasing reliability while maintaining superb performance.
Supporting 70V and 100V installations out of the box, CS amps include RJ45 connectors for use with JBL CSR-V in-wall volume controls. Its universal power supply allows every CS amp to accept AC voltages from 100 to 240 VAC, 50/60 Hz.
And with HARMAN’s GreenEdge™ environmental initiative, CS amps quickly pay for themselves in energy savings.
From the switch-mode universal power supply to the efficient performance of Crown’s DriveCore™ Technology, we continue to set new standards in commercial power amplifier technology.
Simple to configure, the CS amp provides a DriveCore-based sound solution. This replaces up to 500 parts with one small chip, significantly reducing the part count and increasing reliability while maintaining superb performance.
Supporting 70V and 100V installations out of the box, CS amps include RJ45 connectors for use with JBL CSR-V in-wall volume controls. Its universal power supply allows every CS amp to accept AC voltages from 100 to 240 VAC, 50/60 Hz.
And with HARMAN’s GreenEdge™ environmental initiative, CS amps quickly pay for themselves in energy savings.
JBL CSA 140Z/180Z/1120Z
۱-Channel Amplifiers ProfessionalFeatures :
————
• ۱ or 2 output channels with 40W, 80W, 120W per channel
• Built-in 70V and 100V
• Fanless, space-saving 1U design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports the JBL CSR-V wall controller via Ethernet cable
• Universal power supply
• Energy Star® Certified
۱-Channel Amplifiers ProfessionalFeatures :
————
• ۱ or 2 output channels with 40W, 80W, 120W per channel
• Built-in 70V and 100V
• Fanless, space-saving 1U design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports the JBL CSR-V wall controller via Ethernet cable
• Universal power supply
• Energy Star® Certified
Specifications :
——————
Power Output : 40W/80W/120W
Output Channels : 1
Input Sensitivity : 1.4Vrms for 8-ohms
Phantom Power : 27VDC
AC Line Voltage : 100 – 240V, 50/60 Hz
Input Impedance : 20K ohms/50K ohms
Dimensions : 1.7″ x 8.6″ x 11.9″ (43.3mm x 218.5mm x 303.4mm)
Included Accessories : Rack mounting kit
JBL CSA 240Z/280Z/2120Z
۲-Channel Amplifiers ProfessionalFeatures :
————
• ۱ or 2 output channels with 40W, 80W, 120W per channel
• Built-in 70V and 100V
• Fanless, space-saving 1U design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectors
• Universal power supply
• Energy Star® CertifiedSpecifications :
——————
Power Output : 40W/80W/120W
Output Channels : 2
Input Sensitivity : 1.4Vrms for 8-ohms
Phantom Power : 27VDC
AC Line Voltage : 100 – 240V, 50/60 Hz
Input Impedance : 20K ohms/50K ohms
Dimensions : 1.75” x 8.5” x 12” (۴۴٫۴۵mm x 215.9mm x 304.8mm)
Included Accessories : Rack mounting kit
۲-Channel Amplifiers ProfessionalFeatures :
————
• ۱ or 2 output channels with 40W, 80W, 120W per channel
• Built-in 70V and 100V
• Fanless, space-saving 1U design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectors
• Universal power supply
• Energy Star® CertifiedSpecifications :
——————
Power Output : 40W/80W/120W
Output Channels : 2
Input Sensitivity : 1.4Vrms for 8-ohms
Phantom Power : 27VDC
AC Line Voltage : 100 – 240V, 50/60 Hz
Input Impedance : 20K ohms/50K ohms
Dimensions : 1.75” x 8.5” x 12” (۴۴٫۴۵mm x 215.9mm x 304.8mm)
Included Accessories : Rack mounting kit
JBL CSA 1300Z/2300Z
۱ & 2 Channel Amplifiers 300wFeatures :
————
• ۱ or 2 channels X 300W output
• Built-in 70V and 100V
• Space-saving 2 RU design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectorsSpecifications :
——————
Rated Power into 4 Ω or 8 Ω; ۱kHz, ≤ ۰٫۵% THD : 300W
Insertion Loss ( 70V & 100V outputs ) : 1 dB maximum
Input Sensitivity (8 Load) : Balanced line input: 775mVRMS ; RCA Mono Sum input: 300mV RMS
Frequency Response (8Ω, ۲۰Hz – 20kHz , tone controls : +/- 1.0 dB
Total Harmonic Distortion (THD) (@ Full rated power, 20Hz-20kHz) : <0.5%
Signal-to-Noise Ratio (Ref. rated output, 22KHz BW, A-weighted) : >97dB
Input Impedance (nominal) : Euro Block: 20 kΩ (balanced); RCA: 10 kΩ
Maximum Input Level : +22dBu (Norminal)
Crosstalk (Ref. rated power,A-weighted, 1kHz) : Tone Controls : Bass +/-12dB @100Hz , Treble +/-12dB @10kHz
Nominal AC Line Voltages : 100V, 120V, 220V, 230-240V, 50/60 Hz
Minimum Load Impedance :
Low-Z Output : 4 Ω
۷۰V Output : 8 Ω
۱۰۰V Output : 12 Ω
Operating Temperature/Humidity : 0°C to 35°C @ 95% R.H. (non-condensing)
Storage Temperature : -20°C to 85°C
Weight :
CSA1300Z : 13.1 lb (5.95 kg)
CSA2300Z : 17.8 lb (8.05 kg)
Dimensions Width: 17.0 x 10.8 x 3.5 in (432 x 274 x 89 mm)
۱ & 2 Channel Amplifiers 300wFeatures :
————
• ۱ or 2 channels X 300W output
• Built-in 70V and 100V
• Space-saving 2 RU design
• Sleep mode disable function
• Energy-efficient amplifier
• Sleek industrial look with illuminated rings making knobs easy to see and use
• Supports JBL CSR-V wall controller via CAT5 cable with RJ45 connectorsSpecifications :
——————
Rated Power into 4 Ω or 8 Ω; ۱kHz, ≤ ۰٫۵% THD : 300W
Insertion Loss ( 70V & 100V outputs ) : 1 dB maximum
Input Sensitivity (8 Load) : Balanced line input: 775mVRMS ; RCA Mono Sum input: 300mV RMS
Frequency Response (8Ω, ۲۰Hz – 20kHz , tone controls : +/- 1.0 dB
Total Harmonic Distortion (THD) (@ Full rated power, 20Hz-20kHz) : <0.5%
Signal-to-Noise Ratio (Ref. rated output, 22KHz BW, A-weighted) : >97dB
Input Impedance (nominal) : Euro Block: 20 kΩ (balanced); RCA: 10 kΩ
Maximum Input Level : +22dBu (Norminal)
Crosstalk (Ref. rated power,A-weighted, 1kHz) : Tone Controls : Bass +/-12dB @100Hz , Treble +/-12dB @10kHz
Nominal AC Line Voltages : 100V, 120V, 220V, 230-240V, 50/60 Hz
Minimum Load Impedance :
Low-Z Output : 4 Ω
۷۰V Output : 8 Ω
۱۰۰V Output : 12 Ω
Operating Temperature/Humidity : 0°C to 35°C @ 95% R.H. (non-condensing)
Storage Temperature : -20°C to 85°C
Weight :
CSA1300Z : 13.1 lb (5.95 kg)
CSA2300Z : 17.8 lb (8.05 kg)
Dimensions Width: 17.0 x 10.8 x 3.5 in (432 x 274 x 89 mm)
JBL CSA 2120
۲-Channel Amplifiers ProfessionalFeatures :
————
• ۲ x 120W at 4/8Ohms
• Plenum Rated (UL2043)
• Compact size and light weight
• Convection Cooled
• Auto-standby mode for energy savings
• Summing RCA inputs for each channelSpecifications :
——————
Output : 120W @ 4/8 Ohms (1kHz Power, THD+N<0.5%)
Frequency Response : +/- 1dB (@1W into 4 or 8 Ohms)
Load Impedance : Stable from 2 – 16 Ohms
Sensitivity : 1.4Vrms
Signal to Noise Ratio : Greater than 100 dB – 1kHz, A-weighted
Input Impedance : Balanced 20K Ohms/Unbalanced 10K Ohms
Max Input : +20dBu Typical
Dimensions : 8.2″ x 1.7″ x 7″ (209 mm x 44 mm x 178 mm)
Shipping Weight : 2.9 Lbs (1.3 Kg)
Included Accessories : Rack mounting kit
۲-Channel Amplifiers ProfessionalFeatures :
————
• ۲ x 120W at 4/8Ohms
• Plenum Rated (UL2043)
• Compact size and light weight
• Convection Cooled
• Auto-standby mode for energy savings
• Summing RCA inputs for each channelSpecifications :
——————
Output : 120W @ 4/8 Ohms (1kHz Power, THD+N<0.5%)
Frequency Response : +/- 1dB (@1W into 4 or 8 Ohms)
Load Impedance : Stable from 2 – 16 Ohms
Sensitivity : 1.4Vrms
Signal to Noise Ratio : Greater than 100 dB – 1kHz, A-weighted
Input Impedance : Balanced 20K Ohms/Unbalanced 10K Ohms
Max Input : +20dBu Typical
Dimensions : 8.2″ x 1.7″ x 7″ (209 mm x 44 mm x 178 mm)
Shipping Weight : 2.9 Lbs (1.3 Kg)
Included Accessories : Rack mounting kit
JBL CST 2120
۲-Channel Amplifiers ProfessionalFeatures :
————
• Providing two channels for constant voltage operation
• ۷۰V/100V Outputs
• Rack-mountable with CSA2120
• Detachable block input and output connectorsSpecifications :
——————
Max Input Power : 120W/Ch
Max Input Voltage : 32Vrms
Insertion Loss : Less than 1dB
Frequency Response : +/-1 dB @ 70Hz – 15kHz
Dimensions : 8.2″ x 1.7″ x 7″ (209 mm x 44 mm x 178 mm)
۲-Channel Amplifiers ProfessionalFeatures :
————
• Providing two channels for constant voltage operation
• ۷۰V/100V Outputs
• Rack-mountable with CSA2120
• Detachable block input and output connectorsSpecifications :
——————
Max Input Power : 120W/Ch
Max Input Voltage : 32Vrms
Insertion Loss : Less than 1dB
Frequency Response : +/-1 dB @ 70Hz – 15kHz
Dimensions : 8.2″ x 1.7″ x 7″ (209 mm x 44 mm x 178 mm)
نمای پشت پاور آمپلی فایر ها تک کانال و ۲ کانال مارک JBL
نمای پشت پاور آمپلی فایر ها تک کانال مارک JBL
