Features :
————-
• ۱۶۵ mm (6.5 in) horn loaded midrange transducer ( PRX735 )
• ۱٫۵″ diameter next generation JBL neodymium compression driver ( PRX710,712,715,725,735 )
• JBL designed waveguide for accurate coverage
• Efficient Class-D amplifier technology
• Optimized EQ for monitor or front-of-house applications ( PRX712,715 )
• Normal and Boost user selectable EQ presets ( PRX710,725,735 )
• DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
• Line level and direct microphone input capability
• Professional XLR-1/4″ combination inputs, RCA inputs, and XLR loop-through ( PRX710,712,715,725,735 )
• ۲ x XLR-1/4″ combination inputs, with 2 x XLR loop-thru ( PRX718XLF,715XLF )
• Multi-angle enclosure for main PA or floor monitor applications ( PRX712 )
• Multiple injection molded handles with backing cup for easy transport ( PRX725,735 )
• Multiple handles with comfort rubber grips for easy transport ( PRX718XLF,715XLF )
• Integrated 36 mm pole mount socket with angle down tilt
• Injection molded handle with backing cup for easy transport ( PRX712 )
• Integrated M10 suspension points for easy setup ( PRX710,712,715,725,735 )
• Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
• Cloth backed, dent-resistant 16 gauge steel grilles
• AC Power Input 100V – 240V~ 50/60 Hz
JBL PRX710 Specifications :
———————————–
Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 50 Hz – ۱۹٫۶kHz Boost: 42.9 Hz – ۲۰kHz
Frequency Response (±۳ dB) : Normal: 63.5 Hz – ۱۸٫۵kHz Boost: 53 Hz – ۱۸٫۶kHz
Coverage Pattern : 100° x 60° nominal
Directivity Index (DI) : 9 dB
Directivity Factor (Q) : 8
Crossover Frequency : 1.9 kHz
Maximum SPL : 133 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 1 x JBL M110-4 250mm (10 in) woofer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point
Transport : 1 x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth
backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 498.7 x 335.6 x 322.3 mm ( 19.63″ x 13.21″ x 12.69″ )
Net Weight : 16.4 kg (36 lb)
JBL PRX712 Specifications :
———————————–
Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 44.8 Hz – ۱۹٫۶ kHz Boost: 44.8 Hz – ۱۹٫۵ kHz
Frequency Response (±۳ dB) : Normal: 55.7 Hz – ۱۸٫۲ kHz Boost: 56.5 Hz – ۱۷٫۷ kHz
Coverage Pattern : 90° x 50° nominal
Directivity Index (DI) : 10.2 dB
Directivity Factor (Q) : 10.4
Crossover Frequency : 1.8 kHz
Maximum SPL : 135 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 1 x JBL 272G 305mm (12 in) woofer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points
Transport : 1 x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 612 x 384 x 341 mm ( 24.11″ x 15.14″ x 13.44″ )
Net Weight : 19.4 kg (42.5 lb.)
JBL PRX715 Specifications :
———————————–
Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 42.9 Hz – 19.5 kHz Boost: 43.6 Hz – 19.3 kHz
Frequency Response (±۳ dB) : Normal: 58.1 Hz – 17.2 kHz Boost: 60.7 Hz – 16.7 kHz
Coverage Pattern : 90° x 50° nominal
Directivity Index (DI) : 10.2 dB
Directivity Factor (Q) : 10.4
Crossover Frequency : 1.7 kHz
Maximum SPL : 136 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 1 x JBL 275G 380mm (15 in) woofer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : Dual 36 mm pole socket, 12 x M10 Suspension Points
Transport : 1 x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 714 x 445 x 358 mm ( 28″ x 17″ x 14″ )
Net Weight : 21.6 kg (47.5 lb.)
JBL PRX725 Specifications :
———————————–
Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 42 Hz – ۱۸٫۵ kHz Boost: 40 Hz – ۱۸٫۵ kHz
Frequency Response (±۳ dB) : Normal: 49 Hz – ۱۷ kHz Boost: 46 Hz – ۱۷ kHz
Coverage Pattern : 90° x 50° nominal
Directivity Index (DI) : 10.4 dB
Directivity Factor (Q) : 11
Crossover Frequency : 2.4 kHz
Maximum SPL : 139 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 2 x JBL 275G 380mm (15 in) woofer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : 8 x M10 Suspension Points, 1 x M10 pull back point
Transport : 2x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 1070 x 445 x 537.97 mm ( 42″ x 17″ x 21″ )
Net Weight : 37.19 kg (82 lb.)
JBL PRX735 Specifications :
———————————–
Power Rating : 1500 W
Frequency Range (-10 dB) : Normal: 35 Hz – ۲۰ kHz Boost: 34 Hz – ۲۰ kHz
Frequency Response (±۳ dB) : Normal: 42 Hz – ۲۰ kHz Boost: 39 Hz – ۲۰ kHz
Coverage Pattern : 90° x 50° nominal
Directivity Index (DI) : 10.5 dB
Directivity Factor (Q) : 11.2
Crossover Frequency : 480 Hz, 2.0 kHz
Maximum SPL : 136 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced), 10K Ohms (unbalanced)
LF Driver : 1 x JBL 275G 380mm (15 in) woofer
MF Driver : 1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer
HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression driver
Enclosure : Trapezoidal, 18 mm, plywood
Suspension / Mounting : 12 x M10 Suspension Points
Transport : 2x integrated handle with injection molded backing cup
Finish : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
Output Connectors : 1 male XLR balanced output
Dimensions (H x W x D) : 952 x 445 x 537 ( 37″ x 17″ x 21″ )
Net Weight : 34.9 kg (77 lb)
JBL PRX715 XLF Specifications :
—————————————-
Power Rating : 1500 W
Frequency Range (-10 dB) : 37 Hz – 113 kHz
Frequency Response (±۳ dB) : 44 Hz – ۹۱ kHz
Internal Crossover Frequency : 100 Hz DSP controlled 48 dB filter slope
Loop out Crossover Frequency : 120 Hz analog 24 dB filter slope
Maximum SPL : 131 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced)
Polarity : normal or reverse polarity
LF Driver : 1 x JBL 2275H 15 in woofer
Enclosure : Rectangular, 18 mm & 25mm, plywood
Transport : 2 x injection molded handles with backing cup
Finis : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : Two Balanced female XLR/ 1/4″ combo connectors
Output Connectors : Two balanced male XLR connectors.
Dimensions (H x W x D) : 547 x 445 x 580 mm (21″ x 17″ x 22″)
Net Weight : 25.4 kg (56 lb.)
JBL PRX718 XLF Specifications :
—————————————-
Power Rating : 1500 W
Frequency Range (-10 dB) : 30 Hz – 103 Hz
Frequency Response (±۳ dB) : 35 Hz – ۸۷ Hz
Internal Crossover Frequency : 100 Hz DSP controlled 48 dB filter slope
Loop out Crossover Frequency : 120 Hz analog 24 dB filter slope
Maximum SPL : 134 dB
Dynamic Control (Input) : dbx Type IV™ limiter circuit
Input Impedance : 20K Ohms (balanced)
Polarity : normal or reverse polarity
LF Driver : 1 x JBL 2278H 460 mm (18 in) woofer
Enclosure : Rectangular, 18 mm & 25mm, plywood
Transport : 2 x injection molded handles with backing cup
Finis : Obsidian DuraFlex™ finish
Grille : Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
Input Connectors : Two Balanced female XLR/ 1/4″ combo connectors
Output Connectors : Two balanced male XLR connectors.
Dimensions (H x W x D) : 690 x 523 x 723 mm (27″ x 20″ x 28″)
Net Weight : 36.8 kg (81 lb.)
