Crown XLC Series
۲ Channel Power Amplifier Affordable Options for both the Cinema and install Markets
مشخصات عمومی :
• این سری شامل مدل های : XLC2500 , XLC2800 , CXM2000
• دارای ۲ کانال خروجی مجزا از نوع اهمی
• امکان خروجی در ۲ و ۴ و ۸ اهم
Crown XLC Series Features :
———————————-
Innovation
• BSS OMNIDRIVEHD™ DSP processing with IIR filters and linear phase FIR filters
• Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
• XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
• XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
• Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
• Support parallel connection of cinema surround speaker
• Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
• Volume control on rear panel of amplifiers
• High performance, light weight
• DriveCore based amplifier – weighs less than 14lbs (6 kgs)
Crown XLC 2500 Specifications :
—————————————–
Amplifier Power :
۷۷۵ W at 2 ohm per channel
۵۰۰ W at 4 ohm per channel
۳۰۰ W at 8 ohm per channel
۱۵۵۰ W at 4 ohm bridged
۱۰۰۰ W at 8 ohm bridged
Channels : 2
Voltage Gain : 35
Sensitivity : 1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio : (ref. rated power, 8 ohms, 1 kHz) > 103 dB
THD : <0.5%
Damping Factor : (8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion : (from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz – 20 kHz) : 0 dB
Crosstalk :
>85 dB (below rated 8 ohms power, at 1 kHz)
>55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal) : 20 kilohms balanced, 10 kilohms unbalanced
Load Impedance : 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions : 19″ x 3.5″ x 8″ (48.3cm x 8.9cm x 20.6cm)
Weight : 8.3 lbs (3.75 kg)
Shipping Weight ۱۰٫۷ lbs (4.85 kg)
Crown XLC 2800 Specifications :
—————————————–
Amplifier Power :
۱۲۰۰ W at 2 ohm per channel
۷۷۵ W at 4 ohm per channel
۴۰۰ W at 8 ohm per channel
۲۴۰۰ W at 4 ohm bridged
۱۵۵۰ W at 8 ohm bridged
Channels : 2
Voltage Gain : 42
Sensitivity : 1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio : (ref. rated power, 8 ohms, 1 kHz) > 103 dB
THD : <0.5%
Damping Factor : (8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion : (from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz – 20 kHz) : -1 dB
Crosstalk :
>85 dB (below rated 8 ohms power, at 1 kHz)
>55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal) : 20 kilohms balanced, 10 kilohms unbalanced
Load Impedance : 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions : 19″ x 3.5″ x 8″ (48.3cm x 8.9cm x 20.6cm)
Weight : 10.4 lbs (4.72 kg)
Shipping Weight : 13.2 lbs (6 kg)
Crown CXM 2000
Cinema Monitor and Crossover System
Crown CXM 2000 Features :
———————————–
• Built-in speaker monitors the processor input and amplifiers output signals.
• Onboard JBL cinema speaker parameters include crossover, EQ filters, delay, and more to enhance speaker’s performance.
• Fault detection indicates faults on the front panel and sends alarm signals to Theater Management System (TMS).
• Total solution designed to work with JBL passive and bi-amplified cinema speakers in systems using Crown DSi and XLC amplifiers.
• Lit buttons offer easy operation in dark rooms.
• HD-25 connectors and HD-15 connectors for quick and hassle-free connectivity.
Crown CXM 2000 Specifications :
—————————————–
Processor Input Channels : 8 inputs
Input Impedance : (Processor inputs) > 10 kΩ; (Power amplifier inputs) >10 kΩ
Signal to Noise Ratio : 104 dB (A-Weighted)
Crosstalk : >85 dB (A-Weighted)
Internal Monitor Speaker Power : 8W
DSP Section : DSP for left, right and center channel speakers
Dimensions : 19″ x 3.5″ x 8″ (48.3cm x 8.9cm x 20.6cm)
Weight : 8.3 lbs (3.75 kg)
جدول توان خروجی پاور آمپلی فایر های Crown ( کرون ) سری XLC Series
نمای پشت و ورودی و خروجی های پاور آمپلی فایر های Crown ( کرون ) سری XLC Series
نمای پشت و ورودی و خروجی های کراس اوور و مانیتور سینمایی Crown ( کرون ) مدل CXM2000