Crown i-Tech HD Series
۲ & 4 Channel Power Amplifier
مشخصات عمومی :
• این سری شامل مدل های :
I-Tech 5000HD ,I-Tech 9000HD ,I-Tech 12000HD ,I-Tech 4x3500HD
• دارای ۲ و ۴ کانال خروجی مجزا متناسب با مدل دستگاه
• امکان خروجی ۲ ، ۲٫۷ ، ۴ ، ۸ اهمی
Features :
————-
Innovation
• BSS OMNIDRIVEHD™ DSP processing with IIR filters and linear phase FIR filters
• Covered by five patents
• Fan has true tachometer feedback for fan fault protection and precise control over thermal performance, so the amp runs longer and harder than the competition
• Includes SLM (Sweep Load Monitoring) with system-level diagnostics
Performance
• Ultra smooth processing by onboard high-definition BSS OMNIDRIVEHD DSP with 24-bit, 192kHz Cirrus Logic SHARC A/D and D/A converters
• LevelMAX™ peak voltage and RMS power limiters communicate with each other, resulting in smooth and accurate response, better sound
• True Ethernet backbone – fast, reliable and scalable
• High common-mode rejection eliminates hum and RFI on input cables
• ۶th-generation patented Class-I (BCA®) circuitry couples power efficiently to the load and provides low AC current draw
Versatility
• Global Power Supply; universal AC input accepts100-240VAC, 50/60Hz (±۱۵%)
• Front-panel USB connector transfers presets to/from a USB drive to the amp’s DSP
• New software interface based on customer feedback manages presets, provides easier system-level changes, and includes a configuration wizard
• The only product available with analog, AES/EBU, CobraNet®, HiQnet™and Ethernet connectivity
• User -definable front panel security feature
• The only tour sound amplifier that provides inputs routable to any output (analog, AES, or CobraNet)
Power
• Professional-grade connectors for all inputs and outputs
• Full power-supply voltage is always available, allowing instantaneous power on demand
• Quality-graded components let you safely drive the amplifier harder
• More total capacitance provides tremendous energy reserves for power bursts
• ۲۰۰Vrms peak output voltage provides clean transient peaks
Crown I-Tech 5000HD Specifications :
———————————————–
Amplifier Power :
۲۰۰۰ W at 2 ohm per channel
۲۸۰۰ W at 2.7 ohm per channel
۲۵۰۰ W at 4 ohm per channel
۱۲۵۰ W at 8 ohm per channel
۴۰۰۰ W at 4 ohm bridged
۵۰۰۰ W at 8 ohm bridged
Channels : 2
Sensitivity : 1.4Vrms to 7.75Vrms
Signal to Noise Ratio : > 112dB
THD : < 0.1%
Intermodulation Distortion : < 0.2%
Frequency Response : ± ۰٫۲۵dB
Crosstalk : > 80dB
Common Mode Rejection : > 70dB typical
Dimensions : 19″ x 16.2″ x 3.5″ (48.3 cm x 41.1 cm x 8.9 cm)
Net Weight : 28 lbs (12.7 kgs)
Shipping Weight : 36 lbs (16.3 kgs)
Crown I-Tech 9000HD Specifications :
—————————————
Amplifier Power :
۲۸۰۰ W at 2 ohm per channel
۴۲۰۰ W at 2.7 ohm per channel
۳۵۰۰ W at 4 ohm per channel
۱۵۰۰ W at 8 ohm per channel
۵۶۰۰ W at 4 ohm bridged
۷۰۰۰ W at 8 ohm bridged
Channels : 2
Sensitivity : 1.4Vrms to 7.75Vrms
Signal to Noise Ratio : > 112dB
THD : < 0.1%
Intermodulation Distortion : < 0.2%
Frequency Response : ± ۰٫۲۵dB
Crosstalk : > 80dB
Common Mode Rejection : > 70dB typical
Dimensions : 19″ x 16.2″ x 3.5″ (48.3 cm x 41.1 cm x 8.9 cm)
Net Weight : 28 lbs (12.7 kgs)
Shipping Weight : 36 lbs (16.3 kgs)
Crown I-Tech 12000HD Specifications :
————————————————-
Amplifier Power :
۳۷۵۰ W at 2 ohm per channel
۵۴۰۰ W at 2.7 ohm per channel
۴۵۰۰ W at 4 ohm per channel
۲۱۰۰ W at 8 ohm per channel
۷۵۰۰ W at 4 ohm bridged
۹۰۰۰ W at 8 ohm bridged
Channels : 2
Sensitivity : 1.4Vrms to 7.75Vrms
Signal to Noise Ratio : > 112dB
THD : < 0.1%
Intermodulation Distortion : < 0.2%
Frequency Response : ± ۰٫۲۵dB
Crosstalk : > 80dB
Common Mode Rejection : > 70dB typical
Dimensions : 19″ x 16.2″ x 3.5″ (48.3 cm x 41.1 cm x 8.9 cm)
Net Weight : 28 lbs (12.7 kgs)
Shipping Weight : 36 lbs (16.3 kgs)
Crown I-Tech 4x3500HD Specifications :
—————————————————
Channels : 4 inputs, 4 outputs (Analog, AES 3, VDrive, CobraNet)
Sensitivity : Adjustable in 0.1dB increments from 1.28Vrms to 8Vrms
Damping Factor : > 5000
Signal to Noise Ratio : ≥ ۱۰۸dB
THD (full rated power, 20 Hz – 20 kHz) : 0.35%
Frequency Response : ± ۰٫۲۵dB
Intermodulation Distortion (from 0 dB down to -40 dB) : 0.06%
Crosstalk : > 80dB
Common Mode Rejection : > 80dB typical
Dimensions : 3.3″ x 19″ x 16.95″ (8.9 cm x 48.3 cm x 43.1 cm)
Net Weight : 29 lbs (13.2 kgs)
جدول توان خروجی پاور آمپلی فایر های Crown ( کرون ) سری i-Tech HD
نمای پشت و ورودی و خروجی های پاور آمپلی فایر های ۲ کانال Crown ( کرون ) سری i-Tech HD
نمای پشت و ورودی و خروجی های پاور آمپلی فایر ۴ کانال Crown ( کرون ) سری i-Tech HD
